AC/DC

three-phase, DC

Type

brushless

Voltage

24 V, 48 V

Protection class

IP65

Configuration

permanent magnet

Number of poles

4-pole

Other characteristics

CANopen, EtherCAT, ProfiNet, integrated-drive

Power

Max.:  250 W
(0.34 hp)

Min.:  125 W
(0.17 hp)

Intensity

6.3 A, 8 A, 9.9 A, 15.7 A

Torque

0.75 Nm
(0.5532 ft.lb)

Rotational speed

3,000 rpm
(18,849.56 rad.min-1)

Description

BRUSHLESS SERVOMOTOR WITH INTEGRATED DRIVE.

EN: Brushless servomotors with integrated drive. Power from 125 to 250 W

MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.

Rated torque up to 0.75 Nm.

DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 16bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.

All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.