Menu
Your Cart

NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT

NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT
$339.00
Ex Tax: $339.00
  • Stock:
  • Model: SK217
  • Weight: 0.40
  • Dimensions: 14.00 x 3.00 x 11.50
  • SKU: SK217
NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost (plug-and-play)

Top 4 Reasons to Get TOYO KEY PRO OBD II:

1, This TOYO KEY PRO OBD II can work independently, it's plug-and-play.
2, Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H)
3, Use this device can match 2 master keys and 1 valet key
4.TOYO KEY PRO(SK217) Vs TOYO KEY TJECU(SK204):
TOYO KEY PRO can work alone, it is plug-and-play.
TOYO KEY TJECU is supposed to work with cn900mini/ND900 mini

TOYO KEY PRO OBD II Operating Steps:
1. Insert the key into the ignition lock. 
2. Plug the TOYO KEY Pro OBD-II  adapter  into the car.
3. When you hear the beeps for the first time, pull out the key and insert the key again.
4. When you hear the beeps again, it means the first key is matched successful. Meanwhile the immobilizer light is on and the car enters the matching mode.
5. Pull out the first key , then insert the keys which need to be matched one by one.
6. If the  immobilizer light goes out, that means all work done and you can start the car.
7. If the  immobilizer light is on all the time, use any key on-off it for 5 times to finish matching.

Note: Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H)
Use this device can match 2 master keys and 1 valet key.

Package Includes:
1pc x  NEW TOYO KEY PRO OBD II Support Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost
 

Write a review

Note: HTML is not translated!
Bad Good
Captcha